Case Study · Commercial Kitchen · Dallas, TX
The Churro Factory, Dallas TX: Failing VCT in a Commercial Kitchen Replaced with Urethane Cement
The Churro Factory's production kitchen had VCT tile breaking down around its floor drains and equipment. Legacy removed the VCT, left time for plumbers to replace two floor drains, and installed a seamless urethane cement floor with a quartz sand texture in Dallas, Texas.
The Project
Project Overview
The Churro Factory runs a busy production kitchen in Dallas with sheet pan racks, carts and constant wash-down. The floor was VCT (vinyl composition tile), a common choice that does not hold up in a wet commercial kitchen.
Around the trench drain, the round floor drain and the cooking equipment, tiles had cracked, broken away and been patched. Every seam gave water a path under the floor, and the gaps around the drains collected grease and residue that mopping could not reach.
The kitchen needed a floor built for water, heat and daily cleaning, and two of its floor drains were due to be replaced.
Before
Existing Conditions
VCT breaking apart at the drains and equipment, with water working its way under the tile.
Preparation
Removal & Preparation
Legacy removed all of the VCT and prepared the concrete underneath so the new floor could bond directly to the slab.
With the floor open, we built time into the schedule for the plumbers to replace two floor drains. Doing the drains before the new floor goes down means the floor finishes tight to new drain bodies instead of being cut and patched later.
We then installed urethane cement across the kitchen with a medium broadcast of quartz sand for a textured, slip-resistant surface.
The Products
Products Installed
Production Kitchen
Urethane Cement with Quartz Sand Texture
- Removal of all existing VCT
- Concrete preparation for a direct bond to the slab
- Time in the schedule for plumbers to replace two floor drains
- Urethane cement with a medium quartz sand broadcast
Urethane cement stands up to hot water, grease and daily wash-down, and the quartz sand texture gives staff better footing on a wet floor.
Urethane cement flooringResults
Completed Project
The kitchen now has one seamless floor with no tile seams for water to get under, new floor drains, and a textured surface built for a wet production kitchen.
For restaurants and commercial kitchens with failing VCT or quarry tile, Legacy handles removal, coordination around drain work and the new floor.
Finished photos
Is your kitchen floor failing?
Send a few photos of your kitchen floor and drains. Legacy will recommend the right system and schedule it around your operation.
Questions
Common Questions About This Project
Why replace VCT in a commercial kitchen?
VCT has a seam every 12 inches. In a kitchen with constant water and wash-down, water gets into those seams and under the tile, the tile breaks down around drains and equipment, and the gaps hold grease and residue. That is what The Churro Factory's floor was showing.
What is urethane cement flooring?
Urethane cement is a seamless, heavy-duty floor system made for wet, hot and high-traffic areas like commercial kitchens and food plants. It bonds directly to the concrete and stands up to hot water, grease and daily cleaning.
Why add quartz sand to a kitchen floor?
Broadcasting quartz sand into the urethane cement gives the floor texture, so staff have better footing when the floor is wet. On The Churro Factory kitchen we used a medium amount of quartz sand.
Can floor drains be replaced during a floor project?
Yes, and it is the best time to do it. On The Churro Factory job, we built time into the schedule after the VCT came up so plumbers could replace two floor drains before the new floor went down.
