Warehouse & Tilt-Up Flooring
Warehouse and distribution floors that stand up to forklifts, spills and around-the-clock operations, installed without shutting you down.
Warehouse Flooring Built for Forklift Traffic
Forklifts, pallet jacks, dropped loads and constant traffic wear a slab down fast. Bare concrete dusts, joints chip, and spills soak in.
For most dry storage, densified and sealed concrete is the best value. High-traffic and spill-prone zones like docks and battery charging areas get epoxy or urethane cement. We phase the work in zones and run night and weekend crews so shipping never stops.
Legacy Industrial Coatings installs commercial and industrial epoxy flooring, polished concrete and floor coatings from Plano, Texas, across Dallas–Fort Worth, all of Texas and nationwide. See our commercial and industrial epoxy flooring and polished concrete pages.
Serving Dallas, Fort Worth, Plano, Frisco, McKinney, Richardson, Carrollton, Lewisville and the rest of North Texas, plus Houston, Austin, San Antonio and projects across Texas and nationwide.
Where We Work in a Warehouse
New slabs
Densified and sealed concrete that stops dusting before racking goes in.
Control joints
Semi-rigid joint filler shaved flush so forklift wheels stop chipping the edges.
Battery charging areas
Acid-resistant novolac epoxy with cove base to contain spills.
Docks and staging
Urethane cement or epoxy mortar that handles heavy loads and dropped freight.
Aisles and safety marking
Striping for aisles, walkways and hazard areas, installed in the same trip as the floor.
Office fronts and showrooms
Polished concrete for the customer-facing side of the building.
Before & After
Bare concrete to a high-gloss epoxy floor in a metal warehouse building.
FAQ
Warehouse & Tilt-Up Flooring Questions
How much does a warehouse epoxy floor cost?
Our standard high-traffic epoxy floors typically run about $3.50 to $10 per square foot. Size drives most of that range: large open floors land near the low end and small rooms near the high end. Prep, moisture, repairs and after-hours phasing also move the number, so we confirm it with a site walk or plans.
Can you coat our warehouse without shutting down?
Yes. We stage the work in zones so racking and shipping never fully stop, and we run night and weekend crews when the schedule calls for it. Each zone goes back into service once it has cured for forklift traffic.
Should a new warehouse be polished, sealed or coated?
For most dry storage and distribution, densified and sealed concrete is the best value: dustproof, cleanable and nothing to peel. Docks, battery charging and wash areas usually get epoxy or urethane cement on top.
When should control joints be filled?
Joint filler works best once the slab has done most of its shrinking after the pour. We fill joints full depth and shave them flush so forklift wheels roll over them instead of breaking the edges.
Get a bid on your warehouse & tilt-up floor
Send plans or a scope. Site walk within 1–3 business days; full bid within 24 hours of receiving plans.
Request Information
Tell us about your project and we'll follow up within one business day.
Prefer to talk now? Call (214) 305-6516 or